Need info on mudflaps (was: WTB Mudflaps)

[100_Percent_Juice]

I want to buy a set of mudflaps to protect the newly painted sideskirts and I dont want to spend over $100. I have found rallyarmor mud flaps for $109 but I wanted to ask if anyone else has mudflaps that they are pleased with. Also if someone knows where to get them cheaper I would love to hear it, post it or PM me.

[JonnydaJibba]

Are you a member of any WRX-type forums?

[100_Percent_Juice]

I just wanted to ask on the local board right now. thanks though
And I dont know why you moved this to the Classifieds when im not buying or selling mudflaps to a member.

[Kevin M]

Probably because the heading is "WTB mudflaps" and not "need mudflap info."

[100_Percent_Juice]

yeah your right. so do you have any info for me?

[Kevin M]

Just the info on why your post got moved. :D

[Nick Koan]

Yeah, WTB is a common acronym for when you actually want to buy from a member on the forum, not when you are looking for information. I guess I was a bit itchy with the trigger finger.

[Dean]

Señor Cheap Bastard just wants to find a source for some 3/16"-1/4" fiber reinforced rubber and cut some out, but I haven't looked real hard.

[khail19]

We sell the big heavy truck mud flaps at work. You could probably cut some of those up to fit.

[100_Percent_Juice]

Khail how much are these huge trucker flaps. And would you personally use them on your car? Also I have plastic parts for those seats I sold you to go over the metal bolts. I forgot to give them to you.

[khail19]

Khail how much are these huge trucker flaps. And would you personally use them on your car? Also I have plastic parts for those seats I sold you to go over the metal bolts. I forgot to give them to you.

I'm not sure how much they are, but I'm pretty sure less than $30 for a pair. I can check tomorrow for the exact price. I don't really like the mudflap look, so I wouldn't use them personally. They are just thick black rubber, so if you do a nice job of cutting them up they should look fine.

And I was wondering about those plastic pieces, my old ones didn't really fit quite right.

[khail19]

$16 for a pair, they are 24"x24"

[sperry]

$16 for a pair, they are 24"x24"
Got any that are direct bolt on for an F-250 superduty? I dunno what sort of hardware my truck's got for mudflaps, but I know my WRX would be much happier on the trailer if the truck wasn't flinging so much crap into the intercooler.

[JonnydaJibba]

$16 for a pair, they are 24"x24"

I may be paying you a visit for lunch. :)

[knucklesplitter]

Git sum flaps wth the chrome chick silhouette:
http://i14.ebayimg.com/01/i/000/8b/cc/5e5b_1_b.JPG

[khail19]

Got any that are direct bolt on for an F-250 superduty? I dunno what sort of hardware my truck's got for mudflaps, but I know my WRX would be much happier on the trailer if the truck wasn't flinging so much crap into the intercooler.

These are just big square pieces of rubber for semi trucks, 24x24 is the smallest size we have. Jonny was just here to get a pair, he's going to try cutting them up to fit his RS. I don't know if they'd work on your truck without fabbing up the mounting hardware.

[sperry]

These are just big square pieces of rubber for semi trucks, 24x24 is the smallest size we have. Jonny was just here to get a pair, he's going to try cutting them up to fit his RS. I don't know if they'd work on your truck without fabbing up the mounting hardware.
I'm guessing I could probably just drill and bolt them to the fenders... But damn those are some big flaps...

What do you cut them with?

[khail19]

I think a razor knife would work, they're just rubber.

[Kevin M]

I'm guessing I could probably just drill and bolt them to the fenders... But damn those are some big flaps...

What do you cut them with?

http://www.downsope.co.nz/images/TS460.jpg

[JonnydaJibba]

I've got some hardware I'm going to use so hopefully I won't need any metal work. But we shall see and I'll let you know how it goes.


It's thick rubber, but feel easily slicable. I don't think I will get too much movement from them.

[rubberbiscuitt]

i think alex might have 3 sparco mudflaps left. new they are $40 for the set. direct bolt on, pick a color as long as you are patriotic. the first google link i find is $19/pair.

[MattR]

I've cut MANY mudflaps with a sharp knife.

[GC8.Love]

You could pick up a set of the largest (or largest to your liking) of the universal type from Autozone if you're in a pinch and want something immediately and local. I hear they're not too bad, at least for the GC.

..but I have a set of both Fastline and Rally Armor, neither one of which are installed right now (don't get me started..).

Pricewise, if you are willing to wait a little, try for that Sparco deal!

My $.02.

[100_Percent_Juice]

i think alex might have 3 sparco mudflaps left. new they are $40 for the set. direct bolt on, pick a color as long as you are patriotic. the first google link i find is $19/pair.

Who is alex and where do i find him? and these are a direct bolt on for a wrx? and there is nothing more patriotic then black...

[JonnydaJibba]

Did a little test fit and they look hot, now I just have to figure out how to bolt those bitches on...

[Dean]

Who is alex and where do i find him? and these are a direct bolt on for a wrx? and there is nothing more patriotic then black...Did we ever get an answer to this? Which Alex, where?

[Kevin M]

Alex=Hey Zeus

[Dean]

Alex=Hey ZeusHuh? I was just trying to figure out where the Sparco hook up was. We don't have a "Hey Zeus" or a Zeus user.

[Nick Koan]

Huh? I was just trying to figure out where the Sparco hook up was. We don't have a "Hey Zeus" or a Zeus user.

a leet sti.

http://www.seccs.org/forums/member.php?u=317

[Dean]

Ahhhh

[JonnydaJibba]

JESUS DUH!

[100_Percent_Juice]

^post some pics of your flap job son. Oh and L33T needs to get on here and post about his sparco hookup!

[JonnydaJibba]

Um, I only cut them to the size I wanted. I can't really do much because my shoulder is messed up. I held the up with my good arm and they look good, but I can't do much else. I can't keep my bad arm elevated for any length of time. I hope to get it done this weekend (pending arm betterness).

[MattR]

I don't get it.

[tysonK]

^post some pics of your flap job son.

pretty much needs to be locked at this point.

[100_Percent_Juice]

I don't get it.

you dont get what?

[MPREZIV]

Um, I only cut them to the size I wanted. I can't really do much because my shoulder is messed up. I held the up with my good arm and they look good, but I can't do much else. I can't keep my bad arm elevated for any length of time. I hope to get it done this weekend (pending arm betterness).


I don't get it.


What Jon meant to say is: I hurt my arm and didn't put them on.

[MattR]

No, I just don't get the mudflaps. I think they're silly. But whatever.

[MPREZIV]

AH HA! Ok. I don't really dig 'em either, but to each his own!

[MattR]

Yep, TEHO...

Cory, where the hell did you sig come from :lol: Did I say that?

[Nick Koan]

^post some pics of your flap job son.
pretty much needs to be locked at this point.

:lol: :lol:

[JonnydaJibba]

This is the best place ever.

[MPREZIV]

Yep, TEHO...

Cory, where the hell did you sig come from :lol: Did I say that?

I was just reading through old crap the other day, and found this thread: http://www.seccs.org/forums/showthread.php?t=3046&highlight=springs+things

[MattR]

damn thats funny