PDA

View Full Version : Side Lift Jack Pads Quicky ->1200 - 3/19

Dean
2007-03-18, 05:42 PM
I am sick of destroying the factory jack points with standard floor jacks pads, blocks of wood, etc... And

These are the shizzle!http://www.protechproducts.com/side-lift-jack-pad.jpg

The best deal I found is at PureMotorsport, but they want about $9.00 to ship one, but only about a $1 for each additional. http://www.purems.com/products/product.php?PA=&II=833

Note: They have two sizes.

1006 = 4.5" OD

1007 = 3.75" OD

My HF jack takes the 4.5" OD

Anybody else want one so we save on shipping?

Must PM me before Noon Monday march 19th.
Kevin M
2007-03-18, 06:38 PM
I'd take one, except my car is already fubared from being on a lift like 132352! times.
wrxkidid
2007-03-20, 12:45 AM
bummer i missed this. i wonder do they make them for a full rack? because within 2 months we are gonna have a lift well its my lift but i deem it the club lift and it would be nice to have these to not mess up the beautiful body work. :lol:
sybir
2007-08-15, 12:25 AM
Bump, I just ordered two sizes of these things (to futureproof myself).
The pinches on my wagon are toast, but I'd rather not rip up the STi..........of course now, I have to rebend the pinches on the wagon :p
Dean
2007-08-15, 07:12 AM
I like mine, I just wish they were a slightly higher durometer poly and the slots were another 1/4" wider.

I've chewed up my first one a bit. I am considering cutting the second one down so it is just tall enough to clear the sills to reduce the lateral load on the poly when not used on the sills. I am also considering widening the slots a bit, but that would negates shortening them.

If the slots were lightly radiused, that would probably help alignment which I think is the primary cause of damage to it.
sperry
2007-08-15, 02:12 PM
Anyone have a source for these in town? I don't feel like waiting on shipping and I could use a new pad on my jack like now since I'm working on pulling the motor on the WRX this week.
Dean
2007-08-15, 02:34 PM
Anyone have a source for these in town? I don't feel like waiting on shipping and I could use a new pad on my jack like now since I'm working on pulling the motor on the WRX this week.I have one of the larger ones new in the bag if you replace it. Also have a spare standard pad around somewhere.
sperry
2007-08-15, 02:39 PM
I have one of the larger ones new in the bag if you replace it. Also have a spare standard pad around somewhere.
Which one fits on the harbor freight jacks?
Dean
2007-08-15, 02:53 PM
Which Harbor freight jack? Mine takes the larger 4.5" 1006 with the lip trimmed just a hair. I actually dremmeled a groove in the side of the lip so it has a positive lock into the jack head.
sperry
2007-08-15, 03:07 PM
Which Harbor freight jack? Mine takes the larger 4.5" 1006 with the lip trimmed just a hair. I actually dremmeled a groove in the side of the lip so it has a positive lock into the jack head.
Um, the big one? I don't remember their line... plus my jack is like 4 years old... they may not even sell that one anymore.