Anytime after 12:00 works for me.

I got the beer!

I will be out of town this weekend (Family trip to San Diego) so I guess I will miss out on this one :( If for some reason you need more time putting your car together next weekend would work :D

I know I'm only one of many so if I need to wait for another trip......I could :D

I'm sure I'll be able to work out another trip. You shouldn't need wide rubber until spring anyways ;)

So how's the support wagon coming along Aaron? Any updates?

http://www.i-club.com/forums/showthr...153#post725153

page 2

Battlewagon had the motor in the hole last night, we're waiting on timing cover gaskets. Everything else should go quickly, we've just been waiting on parts. Speculataion is that the dealer who did the headgaskets at 120k left out the timing cover gaskets, as well as a frickin' valve spring seat (which is why I had valve problems on #3, but whatever)

Should be done by about 9-10:00 this morning, then I just have to adjust the suspension, swap wheels, and load up for the trip ;)

Yay! So exciting for you :D

That kind of crap is why I hate letting somebody else wrench on the ride. Dealer mechanics seem to be one step below having work-rehab prisoners do the repairs.


Wagon rides again! :banana:

Bump for Updatez###### No Fender Rolling this weekend...


Fender rolling is cancelled for now...Aaron's tranny has blown out, so he has no way to get up here,with the equipment and wheels he needs to bring...We'll reschedule for a couple of weeks down the road, that will give a few who wanted to roll fenders a chance to get on board...


So...No go for this weekend...

Say whaaa!!?! I talked to him at like 4pm, and he said everything way green! :( :( :(

I just talked to him as well. The transmission is gone :(

Poop.

Yeah.
I'm happy too, heh.
I'm really sorry about blowing the plans for this weekend, we didn't foresee any tranny issues, but it's also the longest the car has sat undriven in the past 6 years, so, eh, whatever. :)

Ah well, shit happens.
It just happens all at once when you've got 175k hard miles on a car.

Speculation is that when we pulled out the tranny today to swap out the rear main seal again (that blew out on startup yesterday) that all the crap I had worn off/shaved off/broken off in the tranny got shaken up and jostled around, and as soon as we started the car, even after changing fluid, it shelled out all the internal pumps and crap.

We've got a hookup with a tranny shop who's helping me out, and we'll be revalving and raising line pressure as we rebuild it to really make it pop.

On the plus side, the motor runs and sounds great, pulls nice (when it's not making the tranny slip to all hell) and will be the supreme dopeness once we get the header-back on.

So, another little delay, but I'll be back in action soon, and with what amounts to a new drivetrain, which, while it's not the STi swap I wanted, will revitalize the car for quite a while and keep me from doing something stupid like buying a new Leg Turbo until they come with a 6-speed. Shooting for coming up to Reno with toys and tools in tow the second weekend in November (the 13th or something), if that sounds workable.

Sorry to hear, Aaron. :cry: Hope all goes smoothly in putting it back together.

We can rebuild her. We have the technology.

Eh, when it rains, it pours. I'll come out of this with a much more reliable, slightly faster car, so I can't complain :D

Sorry to hear that Aaron. She's in good hands though.

How goes the car?

Is it going to be ready for a fender rolling party this weekend, or next?

I believe that Aaron is shooting for the weekend of November 20th.

Ko-wrecked.

Car is getting the tranny built this week, and I'm leaving for SEMA today and not coming back till Sunday. The next week is the awards banquet, and I'll be up the weekend after (before Thanksgiving) for fender rolling and the SECCS bar ;)

good so I didnt miss it :D 8)

Bizump, it's true, the battle wagon is rolling (under it's own power, even ;)) and I'll be coming up the weekend of the 20th for fender rolling and festivities.

Scott, can I crash at your place?

Where/when should we do the rolling? I'm thinking Saturday, whenever everybody gets up ;)

Me casa yer casa!

And I'm down for when/where ever on Saturday fo das rollin!

The 20th is THE GAME. I won't be missing it.

Excellent, Mr. Chubbs. ;)


Mwuahahahahahhahaha!

We'll plan on Scott's place, since half of us will be there anyways :D

Anyone who can bring a jack or jackstands, do it, as we've got the get the cars off the ground and the wheels off to bolt the tool on.

I'm in.. Sounds like a plan.

where is that posted?

Extra jack stands? I've got 3 jacks and 4 stands. How many tools do you have?

I forget how equipped you guys are ;)



JC, remember, I ran into your ass at SEMA, and Scott took pics ;)

I'm game. I can bring some stands too.

Our we just getting the legistics out or did I miss this? :shock:

This coming weekend, mang. Be there or......ummmm......don't be. :D

Sweet :D :twisted:

I have 4 stands and a jack if needed. for what its worth I have everything to put the car in the air. If I need to bring more to pull wheels just let me know 8)

Sounds like we should be good; we can only do one car at a time anyways :D

So what time will this be taking place?

Sometime between now and the heat death of the universe.

...or at about 11 am Saturday.

Party, WHOOOOOOOOOOOOOHHHHHH!!!!!!

Oh, sorry :D

See you guys tonight, tomorrow, etc.


BTW, for anyone reading this and coming, I've got to defray the cost of the tool for the shop (I forgot how much this damn thing cost), so we're gonna do like $20 per car, if that sounds fair?
I just don't want to catch anybody by surprise and I hate asking for money ;)

I'll be there but want to get a time slot :D

Just beat up the rest of the guys in line ;)

Or send them to go get milkshakes.........;)

ok then I plan to be there at 11am then :D

I'll be there around 11:00 also.

11am will be the 1st "slot". Mike, if you want to go first, it's all you man!

I'm out...my STi is in a bunch of pieces down at lithia. :cry:

I'll try to sneak in after Mike. I might have to go to work in the afternoon.

:cry:

http://store1.yimg.com/I/engrish-store_1817_1114247

I'll probably be there at 2 or 3.

Ill try to get there by 10:45am so we can get it up and going! :D

Sorry guys, I couldnt make it. I had to go into work early. I guess I'll get'em rolled some other time with Matt when his car is put together.

So get here after work.... Kevin will probably be doing his until at least 6-7 is my guess...

No worries. I was supposed to get off work at 8:30, but left early. I was pretty tired and really didnt feel like coming back out. There shall be other times. Beside, I think I might just go down to Sac at the shop and get my fenders rolled as well as pulled to make way for the new wheels.