My STi is broken.
 

Not sure what the hell happened now...I started it up this morning and it coughed and sputtered then the CEL came on solid, and Cruise light was blinking...So, It runs in limp mode, no boost, so I drive it to lithia. It's there now...I'm waiting to hear what is going on.

I shouldn't have cursed at it last night, I think I upset it.

crap

Wow, sorry to hear that... Bad week for SECCSy cars...

Jebus man :(

Ouch!

Why'd you go to Lithia? We might have been able to figure it out and save you some money if it's not major. I wonder if Kevin's DeltaDash could have pulled the codes.

I also wonder what a blinking "Cruise" means... I've never heard of that. You could have any number of sensors come loose, or failed. Or a fouled spark plug...

They said the blinking cruise means it's in safe mode, the sti motor goes to that status pretty easily from what i was told.

This happened at 7:30 this morning, as I was leaving for work, I didn't have time to mess with it. It's Warranty anyway...

What Scott said. I'd check sensor wires & connections, check obvious ignition components like plugs, wires, coil, etc., and disconnect the battery for a few minutes & step on the brake pedal to clear the keep-alive memory in the computer.

Sorry to hear, Matt. What a hassle. Hopefully they'll figure it out quickly.

Well, it's almost 3:00 - any word?

Not Yet...I'll call them in a little bit.

Time for an EVO MR. :P

EVO MR= EVO Matt Roy Edition....Nice,....


Update on my car...the tumble valve(Not sure what the hell that is) in the intake is fowled...Car runs fine, but they want to replace it anyway. I'll take it back in when the part gets here from Japan..

Um, that's just some crap emissions thing. Tell 'em to just remove it! :P

I just realized I misspelled Fouled...I rule.

Must...resist...fast and furious...reference....gahhh

Oh, I'm sure he said that intentionally. Either that, or Matt him self has become 2 Fast and 2 Furious for his own good.

When I read your message I was about to reply "How did a chicken get in your intake?" :lol:

Hmmm...Which is it? I wonder...Yes, i'm fast...but JC makes me very Furious. it could go either way...

I just keep puttin' shit on my tab at Lithia...

I sucked a pigeon in thru my ITG High Flow Filter... :lol:

Does someone wanna give me a ride to Lithia?

signed-
Stranded in Sparks.

I can be at your work at about 5:15 if'n you want

I would but it would take me an hour just to get to you.

Thank guys...I think I'll ask around here at work...I don;t want to inconvenience anyone.

What time? I could at like 5:30

www.rallysportdirect.com

Check them out they carry an APS tumbler delete with space for an extra set of fuel injectors $599.

I don't care. I'm probably going to Reno anyway and I usually end up at my friends dealer ogling over Eleanor for like an hour anyway. :P

http://www.computergoddess.com/test/...gallery1-1.jpg

Sweet...thanks for all the offers guys, someone at work is taking me now...
sweet car JC

Buy it, it's only $99k. :P

Matt, we've got some JDM tumbler valve deletes at the shop ;)

Oh, and, news flash, my little jaunt back down from Reno signified the end of my EJ25, as it's got a terminal rod knock :lol:

So we're building up another NA 2.5 with JDM-spec heads and a little extra hot sauce, to hold me over until I can do the real swap right ;)

Awsome a sorry at the same time!

Sweet Aaron! That's not such a bad thing...A hassle maybe, but your car will run much better...

JDM Tumble Deletes? I'm interested...What is the install like? It's gotta be pretty easy...I'm planning on coming down to check out the new shop before too long...So maybe I'll grab it then...

In other news...I fixed (for now) My clunking rear strut...Took it apart, lubed and cleaned it, and reassembled it with the impact gun on "hi-heat :lol: "...it sounds good now.

No worries. It's costing me very little considering (less than when I had HG's replaced at the dealer for $2300) and it'll keep the wagon rolling with decent power (mebbe close to 200 at the crank when it's all done) until I get the money and find a perfect donor vehicle ;)

Haha, nice ;)
Yep, some JDM ones. Install's a little involved, and the big problem is that you'll probably still throw CEL's at this point; it's unsure whether ECUTek will be able to bypass that. So it may not be a good option until you're going crazy with the car (standalone management). Ask Nate the nxt time you're down, he knows better than I ;)

At least Scott and I work the same shift, so we'll just use his car instead of my car while it's getting built; shouldn't take too long to get it rehabilitated, though. The BattleWagon will rise again, victorious!

Nate and I discussed this at length last year while I was planning out my motor build/swap. I ended up buying a US WRX manifold instead of a JDM STi one because EcuTek won't cure the debilitating TGV CEL. No TGV sensors, no getting out of safe mode. :(

So how long did it take for Subaru to fix the prob? I get a call from my wife at work last night and she says that as she is trying to leave the CEL comes on and the cruise control light starts blinking. I told her to drive it home mellowly. Is it okay to drive with the CEL on and the cruise light blinking? I figure it's a limp mode thing but I'm new to Sube's so... So supposedly you had a "Tumbler Valve" go bad? Is that next to the "Flux Capacitor?" ...jk. It's little crap like this that makes it nice to have a warranty.

wow, how many miles? I wonder what caused it?

I have a little over 6K miles on mine. Drove the car to the dealer today and it drove fine but the CEL is still on and the cruise control light is blinking still. Supposed to find out Monday...

Actually....Turns out the Tumbler valve hasn't failed, It just failed to operate properly (one time) causing the engine to go to safe mode... They want to replace the part, it hasn;t come in yet, but they just reset the CEL and sent me on my way, I haven't had an issue yet. The dealer told me that temperature changes can cause this to happen, where hte valve doesn't work right...Not a big deal.

ah, cool. Well not cool it happened, but cool it wasnt a big deal.

Well Subaru has no clue what's up with my STi. They said they are calling any and all Subaru dealers to see if they can figure it out. The one thing they do know is that the car is running too lean. They're not sure what the blinking cruise control light means and they figure the CEL is due to the lean condition. Who knows...

Blinking cruise=safe mode. You aren't making peak boost, right?

Problem solved...some vacumn line on the intake manifold had come loose which was causing the lean out and the CEL light. phewww!

I dropped the STi off at Lithia today to get the weird noise fixed. I rev'd up to engine and made it do the whining sound, and the service guy says, "it sounds like you power steering fluid is low." I promply popped open the hood and showed him to full container. :twisted:

You "Poped" the hood?

http://www.geocities.com/dangerart33.../lepopehat.jpg

At least I didn't poop the hood.
Now the typo is fixed :P

Car update. Ray called me and said that one of the barings down by my idler is bad. My car is out of commission until Wednesday. :(
But on the upside I'm getting a rental car, maybe I'll get a Legacy GT. :D

Is that a manufacturing defect, or wear & tear problem? At least its covered under warranty, right?

Not sure whether it's a manufacturing defect, or wear & tear problem. I'd guess its a freak manufacturing defect. Yes, it is covered under warranty.

I talked to Ray today also, my tumbler valve replacement is in, but I'm not going to get it in to Lithia until I get back from vacation, so Nov 16. He said that it probably won't act up again as-is, but it would be wise to have it swapped out while under warranty...I guess it's pretty pricey to do later on...I couldn't agree more...

No car super sucks. Enterprise was all out of vehicles at all locations today....arghhh :x , so I have no car to drive until Wednesday hopefully. pooooo.....

Yeah it's too bad our Subaru dealer isn't like the Infiniti dealer I used to deal with in Vegas; car goes in shop they give you a loaner till it's done and when you get your car back it has been washed and vacumned and they always leave a rose on the seat for my mom (she'll never buy from any other dealer, they've spoiled her). Wouldn't it be nice? Subaru needs to come out with a higher end brand like Infiniti and Lexus are to Nissan and Toyota.