Subaru Enthusiasts Car Club of the Sierras

Subaru Enthusiasts Car Club of the Sierras (https://www.seccs.org/forums/index.php)
-   User Classifieds (https://www.seccs.org/forums/forumdisplay.php?f=13)
-   -   Side Lift Jack Pads Quicky ->1200 - 3/19 (https://www.seccs.org/forums/showthread.php?t=5650)

Dean 2007-03-18 04:42 PM

Side Lift Jack Pads Quicky ->1200 - 3/19
 
I am sick of destroying the factory jack points with standard floor jacks pads, blocks of wood, etc... And

These are the shizzle!http://www.protechproducts.com/side-lift-jack-pad.jpg

The best deal I found is at PureMotorsport, but they want about $9.00 to ship one, but only about a $1 for each additional. http://www.purems.com/products/product.php?PA=&II=833

Note: They have two sizes.

1006 = 4.5" OD

1007 = 3.75" OD

My HF jack takes the 4.5" OD

Anybody else want one so we save on shipping?

Must PM me before Noon Monday march 19th.

Kevin M 2007-03-18 05:38 PM

I'd take one, except my car is already fubared from being on a lift like 132352! times.

wrxkidid 2007-03-19 11:45 PM

bummer i missed this. i wonder do they make them for a full rack? because within 2 months we are gonna have a lift well its my lift but i deem it the club lift and it would be nice to have these to not mess up the beautiful body work. :lol:

sybir 2007-08-14 11:25 PM

Bump, I just ordered two sizes of these things (to futureproof myself).
The pinches on my wagon are toast, but I'd rather not rip up the STi..........of course now, I have to rebend the pinches on the wagon :p

Dean 2007-08-15 06:12 AM

I like mine, I just wish they were a slightly higher durometer poly and the slots were another 1/4" wider.

I've chewed up my first one a bit. I am considering cutting the second one down so it is just tall enough to clear the sills to reduce the lateral load on the poly when not used on the sills. I am also considering widening the slots a bit, but that would negates shortening them.

If the slots were lightly radiused, that would probably help alignment which I think is the primary cause of damage to it.

sperry 2007-08-15 01:12 PM

Anyone have a source for these in town? I don't feel like waiting on shipping and I could use a new pad on my jack like now since I'm working on pulling the motor on the WRX this week.

Dean 2007-08-15 01:34 PM

Quote:

Originally Posted by sperry (Post 103634)
Anyone have a source for these in town? I don't feel like waiting on shipping and I could use a new pad on my jack like now since I'm working on pulling the motor on the WRX this week.

I have one of the larger ones new in the bag if you replace it. Also have a spare standard pad around somewhere.

sperry 2007-08-15 01:39 PM

Quote:

Originally Posted by Dean (Post 103639)
I have one of the larger ones new in the bag if you replace it. Also have a spare standard pad around somewhere.

Which one fits on the harbor freight jacks?

Dean 2007-08-15 01:53 PM

Which Harbor freight jack? Mine takes the larger 4.5" 1006 with the lip trimmed just a hair. I actually dremmeled a groove in the side of the lip so it has a positive lock into the jack head.

sperry 2007-08-15 02:07 PM

Quote:

Originally Posted by Dean (Post 103642)
Which Harbor freight jack? Mine takes the larger 4.5" 1006 with the lip trimmed just a hair. I actually dremmeled a groove in the side of the lip so it has a positive lock into the jack head.

Um, the big one? I don't remember their line... plus my jack is like 4 years old... they may not even sell that one anymore.


All times are GMT -8. The time now is 11:55 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
All Content Copyright Subaru Enthusiasts Car Club of the Sierras unless otherwise noted.