Stock and Stg2 boost numbers
 

I'm curious to see what other peoples boost numbers look like in reno. If you could post them, that would be great.
I'm stage 2 and hit about 12.8psi (.088MPa) through washoe today (4800ft). I think you loss about .48psi for every 1000ft. Target boost for me is 15.8 +-.5. On the low side, I should be at 13psi.
ADDED: guage pressure, tried using the AP to read live boost but the engine ran really bad at idle with it hooked up.

Is that a gauge reading, or log reading? Gauges are notoriously out of sync with what the ECU sees.

17.5 PSI, but that doesn't help you. I'm custom tuned and run an MBC. :)