| 
				  
 
			
			Since we still havent had our first event, I have time to update my mod list hehe. Probably wont have this stuff done my next weekend, but will all be good for hawthorne for sure.
 Suspension:
 
 Vorshlag camber plates, buy($450) and install
 9k front KW race springs, buy($100) and install
 10k rear swift springs for KW's, buy($178 ) and install
 (all these are coming from Drew at GTworx)
 alignment, neg 2.5 front and neg 1.5 rear 0 toe (current setup, but needs a touchup after suspension mods)
 remove passenger rear KW and send in to fix stripped top strut nut, this will wait till I go out of town next
 WORKS rear pillow ball mounts, buy($249) and install
 
 Wheels/Tires:
 
 Powdercoat my 18x9.5 enkei NTO3+M's in either Robispec orange or puss out and go with gunmetal
 Kumho v710's 275/40/17, bought and waiting for arrival
 
 Engine:
 
 GM 3port map sensor to replace stock BCS, bought needs install
 ETS lower intercooler pipe, sitting in garage 6 months needs install
 Samco red radiator hoses, sitting in garage 6 months needs install
 WORKS 3 inch o2 housing, sitting in garage 6 months, needs to be sent to swaintech for white lightning
 Mil.Spec ported and polished exhaust manifold, sitting in garage 6 months (see a trend?) needs swain as well
 Retune after each, even those rad hoses! j/k
 
 I think thats it. Ive been really lazy on sending out my parts for swain and figured I would just put it all on at the same time, so I need to get on it. Ive been seeing evogreen 20g's cheap lately so Im really thinking about it come tax time, but who knows. I need to at least get this stuff sitting around done, preferrably before hawthorne.
 
				__________________Chris #20 SM
ROBISPEC ///
WORKS / WHITELINE / ADVAN RS / RE-01R  / ZEITRONIX PERFORMANCE FRICTION / ETS / FERODO / COSWORTH
My Picture Thread and Dyno Sheet
 
Tuned by ME! |