View Single Post
Old 2011-06-09, 02:30 PM   #3
A1337STI
EJ205
 
A1337STI's Avatar
 
Join Date: Jan 2006
Location: Reno, NV
Posts: 1,840
 
Car: Impreza and an Impreza
Class: AS / CRS PerfStock
 
"pedal on the right"
Default

I don't believe that the RS2.5 ever came with the hill holder. and a few nasioc postings said to just replace all the lines and MC from an automatic.

There's a few posting about Disabling it, but all they are doing it removing the cable that goes to the clutch (already done on my car) which is great, until you want to go from a 3 lined MC to a 2 lined MC ... :O

the most complete is this rambling :

You can just disconnect the cable.
Full delete is as follows:
I disconnected it and bought a brass flare Tee from Burt Subaru....part number 627002101 it has two tees in it, you only need to use one. Disconnect the hill holder hydraulic unit from the hardlines and connect them to one of the "tees" in the brass body (627002101).

So i guess i can just Change my MC, and get a flared T from subaru and seal them off... sorta.. maybe... or i just keep trying things until my car stops when i press the brakes and rolls otherwise...
__________________
Fighting uphill battles, one bullet at a time!


A1337STI is offline   Reply With Quote