Subaru Enthusiasts Car Club of the Sierras - View Single Post

knucklesplitter · 2012-02-25, 10:09 AM

I think some DIY'ers will want a less-expensive flange and/or one for 2.25" runner size, so I had some cut out of 1/2" plate by a local waterjet shop. The port hole is sized for 2.25" runners, but it can be opened up for 2.5" and/or port-matched to the TGV. I also made the flange perimeter a little bigger to allow for more weld area, as not everybody is as good a welder as Ray Cunningham is.

I will post pics later.

Next up are velocity stacks for inside the plenum. Update coming within a week or so.

2012-02-25, 10:09 AM	#3
knucklesplitter EJ205 Real Name: Matt Taylor Join Date: Jun 2005 Location: Cousin-Fck, Carolina Posts: 1,475 Wish in one hand and sht in the other...	I think some DIY'ers will want a less-expensive flange and/or one for 2.25" runner size, so I had some cut out of 1/2" plate by a local waterjet shop. The port hole is sized for 2.25" runners, but it can be opened up for 2.5" and/or port-matched to the TGV. I also made the flange perimeter a little bigger to allow for more weld area, as not everybody is as good a welder as Ray Cunningham is. I will post pics later. Next up are velocity stacks for inside the plenum. Update coming within a week or so. Last edited by knucklesplitter; 2012-02-25 at 10:23 AM.