You need about $5k to get everything overnighted from Japan. We'll put it all on sperry's account at Harry's...
okay, seriously, it depends. Assuming you want no DCCD to make the install simpler and the gearbox cheaper, you just need the box, driveshaft, linkage and shifter, slave cylinder, clutch and flywheel, and one of two rear diff options. You can either just swap the ring and pinion from your diff (which is cheaper, but more fragile) or do it the "right" way and get the whole R180, rear halfshafts, and rear hubs. That will also require you to switch to 2 pots, either the STi or Brembo versions. There are also some issues with installation that need to be dealt with, but nothing major.
__________________
FWD is the new AWD
|