Quote:
|
Originally Posted by SteveM
Yeah STi is 30' front 1°40' rear. But both have ±45' tolerance, so you could end up with +15' in the front on the far edge of the range...  |
The factory specs have nothing to do with whether or not that car has a camber problem. If the car has more rear camber than front, I would consider that a problem. The solution is a proper set of aftermarket camber bolts and a good out-of-spec alignment.
No wonder AS STI's have to run 30+mm front swaybars to prevent poor camber while cornering... they start without any negative camber!