Scott, the NA motors I've done have had one loop on the back passenger side of the manifold, and the AC pump bracket on the other is meant to be used as a lift point. Also, I went down to the hardware store and bought 2 small clevices to attach to the rope hoist. Two lengths of 1/2" rope should be sufficient to lift the motor if you can't make chain work, or don't have any. In the two attached pics you can see the eyelet on the back, just above the ring gear on the passenger side, and the AC bracket next to the alternator. The EJ20 may not use these exact lift points, but I can say with certainty that your motor has 2 similar lift points... unless your AC delete removed the forward one.
__________________
FWD is the new AWD
|