I need desperately - Subaru Enthusiasts Car Club of the Sierras

Hella · 2012-02-28, 09:19 PM

A complete hub assembly for my 02 wrx, passenger front. Doesn't have to be complete. Mainly concerned about the bearing. Please text or call ASAP. 7759976660

Thanks in advance

Kevin M · 2012-02-28, 11:11 PM

New bearings are cheaper than complete assemblies. Did you eat up the knuckle or hub itself when your old one went bad?

A1337STI · 2012-03-05, 05:27 PM

Are GC knuckles compatible? you could borrow one of my spares for a little while to get you by.

i know the strut attatchment is the same.

i know the brake calipers would bolt up,

not sure about A-arm attachment and the half shaft splines though ..

all my spares are pick n pull finds but if you just need something to get you buy for a few weeks you can borrow one no problem.

i'll pm you my number in case you need to go this route.

new wheel bearing into your hub is the proper solution (unless your hub is damaged)

nothing wrong with driving around on a pick n pull hub assembly though ...

Hella · 2012-03-07, 11:55 AM

got one guys thanks tho. airport sells a complete assembly for 90$

2012-02-28, 09:19 PM	#1
Hella n00b Real Name: Josh Join Date: Feb 2012 Posts: 3	I need desperately A complete hub assembly for my 02 wrx, passenger front. Doesn't have to be complete. Mainly concerned about the bearing. Please text or call ASAP. 7759976660 Thanks in advance

2012-02-28, 11:11 PM	#2
Kevin M EJ22T Join Date: Sep 2003 Location: Reno Posts: 9,445 Car: '93/'01 GF6, mostly red Class: 19 FP	New bearings are cheaper than complete assemblies. Did you eat up the knuckle or hub itself when your old one went bad? __________________ FWD is the new AWD

2012-03-05, 05:27 PM	#3
A1337STI EJ205 Join Date: Jan 2006 Location: Reno, NV Posts: 1,840 Car: Impreza and an Impreza Class: AS / CRS PerfStock "pedal on the right"	Are GC knuckles compatible? you could borrow one of my spares for a little while to get you by. i know the strut attatchment is the same. i know the brake calipers would bolt up, not sure about A-arm attachment and the half shaft splines though .. all my spares are pick n pull finds but if you just need something to get you buy for a few weeks you can borrow one no problem. i'll pm you my number in case you need to go this route. new wheel bearing into your hub is the proper solution (unless your hub is damaged) nothing wrong with driving around on a pick n pull hub assembly though ... __________________ Fighting uphill battles, one bullet at a time!

2012-03-07, 11:55 AM	#4
Hella n00b Real Name: Josh Join Date: Feb 2012 Posts: 3	got one guys thanks tho. airport sells a complete assembly for 90$