Not that I needed it, but................. - Page 2 - Subaru Enthusiasts Car Club of the Sierras

Nick Koan · 2005-04-01, 04:38 PM

So, is this an april fools joke by Nick, or one by Nate?

MattR · 2005-04-01, 04:41 PM

Damn I hope you are kidding.

In other news, my car sprouted wings today, so now it truly flies!

sperry · 2005-04-01, 04:47 PM

Quote:

Originally Posted by MattR

In other news, my car sprouted wings today, so now it truly flies!

MattR · 2005-04-01, 04:48 PM

Quote:

Originally Posted by sperry

Quote:

Originally Posted by MattR

In other news, my car sprouted wings today, so now it truly flies!

Good find

MikeSTI · 2005-04-01, 05:08 PM

what kind of numbers was he getting before it blew!!!! :shock:

I hope its just an 4/1 joke!!!

doubleurx · 2005-04-01, 06:00 PM

Quote:

Originally Posted by MikeSTI

what kind of numbers was he getting before it blew!!!! :shock:

I hope its just an 4/1 joke!!!

Ya I suck, but I'm pretty sure I had Nick going.

I called to check and Joe said it made 300 whp as a direct bolt on before tuning, but their wideband O2 sensor broke and he was getting a new one this afternoon. He said they would try to stay late and tune it. We should get some bigger numbers early next week with the FMIC installed.

Happy April fools you fools

Nick Koan · 2005-04-01, 06:09 PM

Quote:

Originally Posted by doubleurx

Ya I suck, but I'm pretty sure I had Nick going.

I half believed you, but I didn't want to say "April's Fools" if it was true.

doubleurx · 2005-04-01, 06:12 PM

Quote:

Originally Posted by nKoan

Quote:

Originally Posted by doubleurx

Ya I suck, but I'm pretty sure I had Nick going.

I half believed you, but I didn't want to say "April's Fools" if it was true.

Fair enough. I told Nate to call me on my cell phone. Unfortunately I am home with no reception, so I will have to wait until Monday for the numbers.

Have a great weekend all.

doubleurx · 2005-04-04, 03:16 PM

I just got off the phone with Nate. With the stock intercooler, so far he has 299 whp/305tq. He is going to play with it tomorrow and will hopefully replace the stock boost selenoid with a perrin one. That combined with the turbo inlet and intercooler are now the limiting factors. The Perrin intercooler is on back order so I'm going to pick the car up and bring it back down when that arrives. I'll post tomorrow when I get home what his final numbers with the stock intercooler. Slowboy says we should get 375 whp with this turbo and a front mount (dynapack). That is around 325 on Nate's Mustang dyno. Shouldn't be out of reach.

Evo Mike · 2005-04-04, 07:19 PM

cool, high 295-305 whp is about what i expected with the stock TMIC.. hopefully you can get up to the low 300s without the IC and the inlet pipe

that'll be great...
still, big numbers either way you go.

totally a monster

qksubi · 2005-04-05, 08:34 AM

Nick is this going to be a track car does nate think you can d-drive this monster how do you think it would auto-x

doubleurx · 2005-04-05, 08:41 AM

Quote:

Originally Posted by qksubi

Nick is this going to be a track car does nate think you can d-drive this monster how do you think it would auto-x

God I hope so to all! It will be my daily driver. As for Auto-X, I have never done it, but want to very much. The cars handling is great with the coilovers and rear sway bar. I really wanted to go this last weekend, but I had no car for it. I'm picking the car up today, so I will let you know how it drives. The FMIC will go on in a couple weeks.

qksubi · 2005-04-05, 10:06 AM

I want to drive it if you dont mind

are going to be at the first real weekend of autox

Kevin M · 2005-04-05, 10:52 AM

Nick, where is boost going positive at? Under 3k?

doubleurx · 2005-04-05, 11:03 AM

Quote:

Originally Posted by BAN SUVS

Nick, where is boost going positive at? Under 3k?

Eric - absolutely.

Kevin: I haven't seen any dyno results just a quick discussion with Nate. Obvioulsy it will have a little more lag than the VF39, but I should have more info this evening. Nate is working on it right now.

doubleurx · 2005-04-06, 08:42 AM

I just picked up the car yesterday afternoon. It is a monster on the highway. We still have some more tuning to do in a couple weeks with the addition of the FMIC and some other Perrin goodies.

The car definately has more lag, but is actually more driveable around town as you don't get into the boost so easily. On the highway, the speed that you need to shift between 3, 4 and 5 is rediculous. The idle speed is a little rough due to the larger injectors, but O'well. We're going to just raise the idle speed a little to help smooth it out.

Kevin, I can get it into positive boost at 2100 RPM and around 7 PSI at 3000 RPM. Max boost is around 20.5 tapering to 19. When we install the FMIC, we're going to do a run at 25 PSI for yucks!

Nate did not get a chance to work on the car yesterday, so currently the numbers are the same - 299/305. Nate thinks we should get another 20 out of it once we can increase the air-flow.

By the way - Mike K thanks again for the ride, and unfortunately I think I do have the flu, so start taking your VC and other remedies ASAP.

MikeK · 2005-04-06, 08:45 AM

Quote:

Originally Posted by doubleurx

By the way - Mike K thanks again for the ride, and unfortunately I think I do have the flu, so start taking your VC and other remedies ASAP.

If you gave me a pox I will start a multi generation vendetta against your house!

doubleurx · 2005-04-06, 08:48 AM

Quote:

Originally Posted by MikeK

Quote:

Originally Posted by doubleurx

By the way - Mike K thanks again for the ride, and unfortunately I think I do have the flu, so start taking your VC and other remedies ASAP.

If you gave me a pox I will start a multi generation vendetta against your house!

Great, no seriously I couldn't even sleep last night. I had a 102 fever. Fortunately the fever is already gone. I'm really sorry if you get this.

sperry · 2005-04-06, 08:54 AM

Quote:

Originally Posted by doubleurx

Quote:

Originally Posted by MikeK

Quote:

Originally Posted by doubleurx

By the way - Mike K thanks again for the ride, and unfortunately I think I do have the flu, so start taking your VC and other remedies ASAP.

If you gave me a pox I will start a multi generation vendetta against your house!

Great, no seriously I couldn't even sleep last night. I had a 102 fever. Fortunately the fever is already gone. I'm really sorry if you get this.

Note to self... avoid Mike and Nick. Like the plague. Litterally.

doubleurx · 2005-04-27, 11:08 AM

Here it is

MikeK · 2005-04-27, 11:25 AM

Awesome numbers ... but I think I would actualy prefer the old torque curve, especially for autocross

Nick Koan · 2005-04-27, 12:15 PM

Quote:

Originally Posted by MikeK

Awesome numbers ... but I think I would actualy prefer the old torque curve, especially for autocross

Yeah, thats what I was thinking.

But, it is still putting down an impressive amount of power everywhere.

doubleurx · 2005-04-27, 12:57 PM

Quote:

Originally Posted by MikeK

Awesome numbers ... but I think I would actualy prefer the old torque curve, especially for autocross

Absolutely. I wish I could have that torque curve with the power it has now! For the track though it should be a ton o' fun. Notice the power on the top end doesn't want to taper. If only I could get an 8500 RPM redline.........now that would be interesting.

Kevin M · 2005-04-27, 01:06 PM

Your bottom end is good for close to 8000 of that. You can dyno test with an 8000 rpm redline to see if you get valve float.

sperry · 2005-04-27, 01:08 PM

So what's the explaination of the huge loss of early torque? Is that just the lag from the front mount? Or is that baseline from before the new turbo?

Also, you're only about $8000 worth of head work away from a 9,000 rpm redline!

2005-04-01, 04:38 PM	#26
Nick Koan JDM Cowboy Real Name: Nick Join Date: Oct 2003 Location: Somewhere Posts: 8,642 Car: 2015 Mazda 3	So, is this an april fools joke by Nick, or one by Nate? __________________ While a standard engine is powered by a belt connected to the crankshaft, a turbo engine runs on its own exhaust steam, making it more energy efficient. -- CNN

2005-04-01, 04:41 PM	#27
MattR El Matador Real Name: Matt Join Date: Dec 2002 Location: Reno, NV Posts: 10,660 Car: 2012 Toyota Tacoma Class: ?	Damn I hope you are kidding. In other news, my car sprouted wings today, so now it truly flies! __________________ "Dallas..We have a problem.”

2005-04-01, 05:08 PM	#30
MikeSTI EJ205 Join Date: Aug 2003 Location: Reno, NV Posts: 2,354 Car: 2004 STi Class: TSM I can't complain	what kind of numbers was he getting before it blew!!!! :shock: I hope its just an 4/1 joke!!! __________________ Cobb Stage 2

2005-04-04, 07:19 PM	#35
Evo Mike EJ251 Join Date: Apr 2004 Posts: 513	cool, high 295-305 whp is about what i expected with the stock TMIC.. hopefully you can get up to the low 300s without the IC and the inlet pipe that'll be great... still, big numbers either way you go. totally a monster __________________ I Can't Believe My Friends.... Drive WRX's....

2005-04-05, 10:52 AM	#39
Kevin M EJ22T Join Date: Sep 2003 Location: Reno Posts: 9,445 Car: '93/'01 GF6, mostly red Class: 19 FP	Nick, where is boost going positive at? Under 3k? __________________ FWD is the new AWD

2005-04-04, 03:16 PM	#34
doubleurx EJ205 Join Date: May 2004 Location: Truckee Posts: 1,948	I just got off the phone with Nate. With the stock intercooler, so far he has 299 whp/305tq. He is going to play with it tomorrow and will hopefully replace the stock boost selenoid with a perrin one. That combined with the turbo inlet and intercooler are now the limiting factors. The Perrin intercooler is on back order so I'm going to pick the car up and bring it back down when that arrives. I'll post tomorrow when I get home what his final numbers with the stock intercooler. Slowboy says we should get 375 whp with this turbo and a front mount (dynapack). That is around 325 on Nate's Mustang dyno. Shouldn't be out of reach.

2005-04-05, 08:34 AM	#36
qksubi Assault Mechanic Join Date: Apr 2004 Location: Reno Posts: 996 Car: 13 Sti Hatch Satin white Class: TBSP/TT-2 Aim for the EYES!	Nick is this going to be a track car does nate think you can d-drive this monster how do you think it would auto-x

2005-04-05, 10:06 AM	#38
qksubi Assault Mechanic Join Date: Apr 2004 Location: Reno Posts: 996 Car: 13 Sti Hatch Satin white Class: TBSP/TT-2 Aim for the EYES!	I want to drive it if you dont mind are going to be at the first real weekend of autox

2005-04-06, 08:42 AM	#41
doubleurx EJ205 Join Date: May 2004 Location: Truckee Posts: 1,948	I just picked up the car yesterday afternoon. It is a monster on the highway. We still have some more tuning to do in a couple weeks with the addition of the FMIC and some other Perrin goodies. The car definately has more lag, but is actually more driveable around town as you don't get into the boost so easily. On the highway, the speed that you need to shift between 3, 4 and 5 is rediculous. The idle speed is a little rough due to the larger injectors, but O'well. We're going to just raise the idle speed a little to help smooth it out. Kevin, I can get it into positive boost at 2100 RPM and around 7 PSI at 3000 RPM. Max boost is around 20.5 tapering to 19. When we install the FMIC, we're going to do a run at 25 PSI for yucks! Nate did not get a chance to work on the car yesterday, so currently the numbers are the same - 299/305. Nate thinks we should get another 20 out of it once we can increase the air-flow. By the way - Mike K thanks again for the ride, and unfortunately I think I do have the flu, so start taking your VC and other remedies ASAP.

2005-04-27, 11:08 AM	#45
doubleurx EJ205 Join Date: May 2004 Location: Truckee Posts: 1,948	Dyno sheet Here it is Attached Thumbnails

2005-04-27, 11:25 AM	#46
MikeK Captain Turbo Join Date: Feb 2004 Location: Reno Posts: 3,318 Car: 05 STi	Awesome numbers ... but I think I would actualy prefer the old torque curve, especially for autocross

2005-04-27, 01:06 PM	#49
Kevin M EJ22T Join Date: Sep 2003 Location: Reno Posts: 9,445 Car: '93/'01 GF6, mostly red Class: 19 FP	Your bottom end is good for close to 8000 of that. You can dyno test with an 8000 rpm redline to see if you get valve float. __________________ FWD is the new AWD

2005-04-27, 01:08 PM	#50
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	So what's the explaination of the huge loss of early torque? Is that just the lag from the front mount? Or is that baseline from before the new turbo? Also, you're only about $8000 worth of head work away from a 9,000 rpm redline! __________________ Is you is, or is you ain't, my con-stit-u-ints?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust gasket help needed fast :(	M3n2c3	Technical Chat	15	2006-09-02 09:15 AM
Office help needed asap!	Kevin M	User Classifieds	19	2006-07-13 12:20 PM
Oil pressure sensor adapter fitting needed	ivanko	Technical Chat	4	2005-08-18 10:04 AM
Paging MikeK... your vending machine experience is needed!	sperry	Off Topic Chat	10	2005-04-14 03:17 PM
My car has issues. Help needed.	JoelK	General Subaru Discussion & Club Chat	22	2004-03-16 12:17 PM