Subaru Enthusiasts Car Club of the Sierras  

Go Back   Subaru Enthusiasts Car Club of the Sierras > Car Enthusiast Forums > Technical Chat

Technical Chat Ask and answer technical car questions.

Reply
 
Thread Tools
Old 2005-09-14, 02:21 AM   #1
Duckie
EJ22
 
Join Date: Mar 2005
Location: Reno
Posts: 309
Default ABS Brakes in the SVX

Well, it is 3:00am and I am bored so I decided I would post something on the board. Well, I don't really think I need ABS brakes ad was wondering what the weight savings would be if I took them out. As long as I have brakes that work well...who need abs? I wonder how much of a pain in the ass it would be to take it out, and how much weight it would save. This probably shouldn't be in tech...maybe just in the normal forum *shrugs*

PS I am such a car noob = )
__________________
*quack*

Last edited by Duckie; 2005-09-14 at 04:01 AM. Reason: Bored
Duckie is offline   Reply With Quote
Old 2005-09-14, 08:13 AM   #2
AtomicLabMonkey
Nightwalker
 
AtomicLabMonkey's Avatar
 
Real Name: Austin
Join Date: Dec 2002
Location: Oshkosh, WI
Posts: 4,063
 
Car: '13 WRX
 
YGBSM
Default

Do you drive this car in the winter? If so, probably not a good idea.

As for taking it out, you'd have to cut, re-route & re-flare all the brake hard lines which is indeed a pain in the ass.
__________________
"None of you seem to understand. I'm not locked in here with you.. you're locked in here with me."
AtomicLabMonkey is offline   Reply With Quote
Old 2005-09-14, 09:08 AM   #3
Duckie
EJ22
 
Join Date: Mar 2005
Location: Reno
Posts: 309
Default

I drive it in the winter, but I will probably have alt. transportation. How long of a project do you think it would be? *evil looks in his eyes*
__________________
*quack*
Duckie is offline   Reply With Quote
Old 2005-09-14, 09:17 AM   #4
AtomicLabMonkey
Nightwalker
 
AtomicLabMonkey's Avatar
 
Real Name: Austin
Join Date: Dec 2002
Location: Oshkosh, WI
Posts: 4,063
 
Car: '13 WRX
 
YGBSM
Default

Couldn't tell you since I don't have an SVX. When I plumbed in a manual proportioning valve in my rear line on the Mustang, it took a few hours between locating the correct flare fittings, cutting, bending lines, flaring, bleeding, etc.

That was working on one relatively short section of line, so maybe you can extrapolate from there...
__________________
"None of you seem to understand. I'm not locked in here with you.. you're locked in here with me."
AtomicLabMonkey is offline   Reply With Quote
Old 2005-09-14, 10:38 AM   #5
sperry
The Doink
 
sperry's Avatar
 
Real Name: Scott
Join Date: Nov 2002
Location: Portland, OR
Posts: 20,335
 
Car: '09 OBXT, '02 WRX, '96 Miata
Class: PDX/TT-6
 
The way out is through
Default

Duckie, you can pull the ABS fuse on the car and drive around w/ it disabled for a bit to see what you think.

IMO, the Subaru ABS kinda sucks in the snow, at least at slow speeds. I know there have been several instances where if I had been able to lock the wheels up in the snow, it would have stopped much faster than the ABS let me. However, at any sort of speed, especially in slippery conditions, the ABS is *way* better than not. If you have to get on the binders hard at say 40 mph in the snow/ice, there's a good chance you'll lock the tires immediately and go balistic... no control until you hit something. The ABS will at least keep the car in line. It's just at like 5 mph that it really sucks.

As far as weight savings, the only weight you'll save the that of the ABD control block located in the front of the engine bay on the passenger side. I've never had one out so I don't know what they weigh, but I'd guess they're under 15-20 lbs. Not a lot of weight savings considering the overall weight of the car. The biggest reason people remove the ABS is for *space* under the hood, not weight. With the ABS gone, there's a lot more room for intake piping and turbo bits.

So, unless you're planning on making the car a dedicated track car, or really need the room for a turbo or something, I'd just leave the ABS alone. Or at the most, install a switch on the ABS fuse so you can kill it at will if you're crawling around in the snow somewhere.
__________________
Is you is, or is you ain't, my con-stit-u-ints?
sperry is offline   Reply With Quote
Old 2005-09-15, 11:17 PM   #6
Duckie
EJ22
 
Join Date: Mar 2005
Location: Reno
Posts: 309
Default

Well I would like to take the ABS out for future modifications(Side mounted intercoolers) in order to run more boost on my stage 3.
__________________
*quack*
Duckie is offline   Reply With Quote
Old 2005-09-16, 07:27 PM   #7
Dean
Seņor Cheap Bastarde
 
Dean's Avatar
 
Real Name: Dean
Join Date: May 2003
Location: $99 Tire Store
Posts: 9,294
 
Car: $.04 STI
Class: Fast,Cheap & Reliable=STI
 
Deal, did somebody say Deal? Oh, Dean, yeah that's me.
Default

Unless you are building a pure drag car, or plan to run the car in a competition road race class that requires ABS removal, I would not reccomend removing it. With the exception of the rare low speed issue Scott described, ABS is a good thing.

Very few race car drivers can outperform the performance of most production ABS systems, and the general population doesn't stand a chance of beating it. By far the biggest advantage it offers is allowing you to continue to have steering control under heavy braking. This is extrmely valuable in every day driving, as well as it's maximizing straight line braking performance at the track.

I'd relocate it rather than removing it if at all possible.
__________________
I am a Commodore PET --- Now get off my lawn you kids...
Dean is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
The SVX got hit this morning sperry General Subaru Discussion & Club Chat 65 2007-02-09 03:11 PM
Carbon-ceramic brakes to become cost-effective for enthusiasts? Nick Koan Technical Chat 1 2006-12-21 12:14 PM
Testing the water, FS: 1994 SVX LSi, *excellent* condition sperry User Classifieds 0 2006-08-22 12:44 PM
SVX suspension, Attn: sybir! sperry Technical Chat 30 2005-10-17 04:21 PM
ATTN Bugeye owners! Does your ABS suck? sperry Technical Chat 15 2005-10-14 02:09 PM


All times are GMT -8. The time now is 01:09 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
All Content Copyright Subaru Enthusiasts Car Club of the Sierras unless otherwise noted.