03 WRX Part Out - Subaru Enthusiasts Car Club of the Sierras

Forgotten · 2006-06-26, 08:29 PM

Edit 2: Putting it up for the last time before it goes to Nasioc etc.

Edit: The car is now back to stock thanks to Cory. Bump for new dibs and stuff I can actually sell.

I want to buy a stock WRX blow-off valve. PM me.

It begins...

The Car
2003 Subaru WRX Platinum Silver Metallic
47,XXX Miles Completely Stock
Mechanically Perfect, Slight exterior blemishes which will be taken care of before sale.
$15,000

The Parts

02/03 Cobb Accessport
Comes with everything except the original box
$450

02/03 Eibach Prokit Springs
10k Miles
$150

HKS SSQV Blow Off Valve
Slight Mark where it touches Hood
$100

PSM STi Wing and Trunk
Near Perfect condition.
$300

02/03 PSM STi Hoodscoop
Nearly Perfect
$100

Apex'i N1 Type V Coilovers.
I had them on for 18k miles. They were awesome.
$1000

Feel free to PM me offers.

JonnydaJibba · 2006-06-27, 07:51 AM

Quote:

Originally Posted by Forgotten

17x8 Gunmetallic Rota Revs
First Set on a car in America! (Like it matters) Also they can have ~20% tread RE070s on them
Two little spots of curb rash, touched up
$700 with tires, $500 with out

Kevin read this please! You think these bitches would fit on my car? I dunno if the fact that they are half an inch wider than my current rims matters or not. I don't really want those tires.

Kevin M · 2006-06-27, 08:19 AM

They would be good wheels, but you'd have to do minor fender modding to clear tires worth having 17x8s for. 235/40 would be good, and you could probably get away with pulling the black rubber edge off the inside lip and bending it upwards a bit. But why don't you want the tires? They rule.

JonnydaJibba · 2006-06-27, 08:36 AM

Quote:

Originally Posted by BAN SUVS

They would be good wheels, but you'd have to do minor fender modding to clear tires worth having 17x8s for. 235/40 would be good, and you could probably get away with pulling the black rubber edge off the inside lip and bending it upwards a bit. But why don't you want the tires? They rule.

Yeah but with only 20% left on them... seems like a lot of work... all I want is black wheels. Maybe I can get some stock LGT 17s and paint em.

But then again 235s would be so hot.

Kevin M · 2006-06-27, 08:40 AM

20% left = exactly enough to get you to winter. Just be ready to buy winters (or swap wheels) by the end of september and it would be worth it. And rolling the fenders isn't hard, not for as little as you should need to do. Just go test fit them and see how much there is. You could have it all squared away in like 45 minutes, max.

Libila · 2006-06-27, 09:42 AM

So I guess you don't want these then Pete?

JonnydaJibba · 2006-06-27, 09:48 AM

^^so hawt!

Libila · 2006-06-27, 10:06 AM

Jonny, if you want anything let me know. I can find parts for you. In fact, same goes for any SECCS member.

[/hijack]

sorry Pete

Kevin M · 2006-06-27, 10:12 AM

go pester KW into making me a set of Variant 3s.

NevadaSTi · 2006-06-27, 11:56 AM

Quote:

Originally Posted by Forgotten

Also Brian do you still want the dented WRX Trunk?

Maybe, how much? Or free???

JonnydaJibba · 2006-06-27, 12:15 PM

Quote:

Originally Posted by NevadaSTi

Maybe, how much? Or free???

The dent isn't that bad. I bet it could be knocked out with little effort.

NevadaSTi · 2006-06-27, 12:55 PM

I've seen the dents. If I get the deck lid, I am gonna take the wing off, fill the holes, and get the whole thing repainted. That way I will have a wingless STi.

khail19 · 2006-06-27, 01:50 PM

Quote:

Originally Posted by Libila

So I guess you don't want these then Pete?

Me want! If they are LHD at least.

Forgotten · 2006-06-27, 09:23 PM

Quote:

Originally Posted by NevadaSTi

Maybe, how much? Or free???

I can only do this if I get someone to trade me a WRX Trunk for the STi Trunk, but it will be cheap if I can get the trade. 75 bucks or something?

I can't do the pics or anything else today, but tomorrow I'll have everything up.

Forgotten · 2006-09-11, 04:41 PM

Bump

cody · 2006-09-11, 07:52 PM

You F'er, you charged me $20 for the sidemarkers!

I don't need the Perrin endlinks because I already have solid endlinks.

cody · 2006-09-29, 07:24 PM

Cusco Sway and Whiteline mounts are installed as of 10 minutes ago. The right side was a byotch but I finally got it. Apparently the weakest setting is almost as weak as my 20mm "sedan" sway according to the test drive I just took in an abandoned parking lot...still understeers a tad. Two more settings to try.

Pete, you're a scholar and a gentleman, thanks for all your help last night. I'm glad we called it a night when we did though. It's way better to come at things fresh when I get frustrated...stupid canister thingy.

Um, Bump!

Joeyy · 2006-09-30, 02:38 PM

Ha, that black box in the right rear corner is a bitch. It sucks that the sway bar mounts have anything to do with the mounting of the peace of shit box. What the hell is that thing anyway?

Kevin M · 2006-09-30, 02:53 PM

It's the charcoal canister. Its purpose is to allow the gas tank to vent (when the temperature changes) without spewing raw gas fumes into the atmosphere.

Forgotten · 2007-01-13, 12:31 PM

Bump

100_Percent_Juice · 2007-01-13, 01:05 PM

If you still have the AP, PM ME!!!!
I wants it!!

ALSO PM ME IF YOU STILL HAVE THE STI TRUNK LID/SPOILER!!!!!

knucklesplitter · 2007-01-13, 01:23 PM

Quote:

Originally Posted by 100_Percent_Juice

If you still have the AP, PM ME!!!!
I wants it!!

ALSO PM ME IF YOU STILL HAVE THE STI TRUNK LID/SPOILER!!!!!

That was on my car from the factory.

Sell it, forgotten (if you still have it). I decided not to buy it back.

Forgotten · 2007-01-13, 03:30 PM

Matt your car looks better with the euro wing anyways.

PMs sent.

100_Percent_Juice · 2007-01-13, 05:17 PM

yeah that euro wing is the hawtness

khail19 · 2007-01-13, 07:19 PM

Quote:

Originally Posted by 100_Percent_Juice

ALSO PM ME IF YOU STILL HAVE THE STI TRUNK LID/SPOILER!!!!!

Do you have the regular WRX wing or are you wingless right now? I'm in need of a PSM wingless trunk lid if you happen to have one.

2006-06-26, 08:29 PM	#1
Forgotten EJ22 Join Date: Jan 2005 Posts: 348 Car: 05 STi	03 WRX Part Out Edit 2: Putting it up for the last time before it goes to Nasioc etc. Edit: The car is now back to stock thanks to Cory. Bump for new dibs and stuff I can actually sell. I want to buy a stock WRX blow-off valve. PM me. It begins... The Car 2003 Subaru WRX Platinum Silver Metallic 47,XXX Miles Completely Stock Mechanically Perfect, Slight exterior blemishes which will be taken care of before sale. $15,000 The Parts 02/03 Cobb Accessport Comes with everything except the original box $450 02/03 Eibach Prokit Springs 10k Miles $150 HKS SSQV Blow Off Valve Slight Mark where it touches Hood $100 PSM STi Wing and Trunk Near Perfect condition. $300 02/03 PSM STi Hoodscoop Nearly Perfect $100 Apex'i N1 Type V Coilovers. I had them on for 18k miles. They were awesome. $1000 Feel free to PM me offers. __________________ "I piss 200 horsepower." -MattR Last edited by Forgotten; 2007-01-13 at 12:30 PM.

2006-06-27, 08:19 AM	#3
Kevin M EJ22T Join Date: Sep 2003 Location: Reno Posts: 9,445 Car: '93/'01 GF6, mostly red Class: 19 FP	They would be good wheels, but you'd have to do minor fender modding to clear tires worth having 17x8s for. 235/40 would be good, and you could probably get away with pulling the black rubber edge off the inside lip and bending it upwards a bit. But why don't you want the tires? They rule. __________________ FWD is the new AWD

2006-06-27, 08:40 AM	#5
Kevin M EJ22T Join Date: Sep 2003 Location: Reno Posts: 9,445 Car: '93/'01 GF6, mostly red Class: 19 FP	20% left = exactly enough to get you to winter. Just be ready to buy winters (or swap wheels) by the end of september and it would be worth it. And rolling the fenders isn't hard, not for as little as you should need to do. Just go test fit them and see how much there is. You could have it all squared away in like 45 minutes, max. __________________ FWD is the new AWD

2006-06-27, 09:48 AM	#7
JonnydaJibba EJ207 Join Date: Apr 2005 Location: Reno/Sparks, Nevada Posts: 3,482 Car: 2000 2.5RS Class: RestNPeace Master Slurper.	^^so hawt! __________________ "Why do chicks tell you to call and then not answer....so gay." "Cuz girls are fags I dunno"

2006-06-27, 10:12 AM	#9
Kevin M EJ22T Join Date: Sep 2003 Location: Reno Posts: 9,445 Car: '93/'01 GF6, mostly red Class: 19 FP	go pester KW into making me a set of Variant 3s. __________________ FWD is the new AWD

2006-06-27, 09:42 AM	#6
Libila EJ205 Real Name: Tim Join Date: Jun 2004 Location: Reno, NV Posts: 1,384 Car: '94 L	So I guess you don't want these then Pete?

2006-06-27, 10:06 AM	#8
Libila EJ205 Real Name: Tim Join Date: Jun 2004 Location: Reno, NV Posts: 1,384 Car: '94 L	Jonny, if you want anything let me know. I can find parts for you. In fact, same goes for any SECCS member. [/hijack] sorry Pete

2006-06-27, 12:55 PM	#12
NevadaSTi EJ251 Real Name: Brian Join Date: Mar 2005 Location: Minden, Nv. Posts: 989 Car: 1994 Toyota 4Runner Some mistakes are too much fun to only make once	I've seen the dents. If I get the deck lid, I am gonna take the wing off, fill the holes, and get the whole thing repainted. That way I will have a wingless STi. __________________ The last living thing on earth will be me. I'll step on the last cockroach.

2006-09-11, 04:41 PM	#15
Forgotten EJ22 Join Date: Jan 2005 Posts: 348 Car: 05 STi	Bump __________________ "I piss 200 horsepower." -MattR

2006-09-11, 07:52 PM	#16
cody Candy Mountain Real Name: Cody Join Date: May 2005 Location: Californication Posts: 7,751 Car: 03 Pussy Wagon, now with more pink! Class: TESP OMG Internet!	You F'er, you charged me $20 for the sidemarkers! I don't need the Perrin endlinks because I already have solid endlinks. __________________ Slow and low, that is the tempo.

2006-09-29, 07:24 PM	#17
cody Candy Mountain Real Name: Cody Join Date: May 2005 Location: Californication Posts: 7,751 Car: 03 Pussy Wagon, now with more pink! Class: TESP OMG Internet!	Cusco Sway and Whiteline mounts are installed as of 10 minutes ago. The right side was a byotch but I finally got it. Apparently the weakest setting is almost as weak as my 20mm "sedan" sway according to the test drive I just took in an abandoned parking lot...still understeers a tad. Two more settings to try. Pete, you're a scholar and a gentleman, thanks for all your help last night. I'm glad we called it a night when we did though. It's way better to come at things fresh when I get frustrated...stupid canister thingy. Um, Bump!

2006-09-30, 02:38 PM	#18
Joeyy i can has kart? Join Date: Jun 2005 Location: CA Posts: 1,228	Ha, that black box in the right rear corner is a bitch. It sucks that the sway bar mounts have anything to do with the mounting of the peace of shit box. What the hell is that thing anyway?

2006-09-30, 02:53 PM	#19
Kevin M EJ22T Join Date: Sep 2003 Location: Reno Posts: 9,445 Car: '93/'01 GF6, mostly red Class: 19 FP	It's the charcoal canister. Its purpose is to allow the gas tank to vent (when the temperature changes) without spewing raw gas fumes into the atmosphere. __________________ FWD is the new AWD

2007-01-13, 12:31 PM	#20
Forgotten EJ22 Join Date: Jan 2005 Posts: 348 Car: 05 STi	Bump __________________ "I piss 200 horsepower." -MattR

2007-01-13, 01:05 PM	#21
100_Percent_Juice (40 percent vodka) Real Name: Joel Join Date: Oct 2006 Location: Reno, NV Posts: 4,446 Car: 2004WRX Class: Baby-Hauler/GroceryGetter	If you still have the AP, PM ME!!!! I wants it!! ALSO PM ME IF YOU STILL HAVE THE STI TRUNK LID/SPOILER!!!!! __________________ "A power nap is when you sleep on someone who is weaker than you." - Dimitri Martin

2007-01-13, 03:30 PM	#23
Forgotten EJ22 Join Date: Jan 2005 Posts: 348 Car: 05 STi	Matt your car looks better with the euro wing anyways. PMs sent. __________________ "I piss 200 horsepower." -MattR

2007-01-13, 05:17 PM	#24
100_Percent_Juice (40 percent vodka) Real Name: Joel Join Date: Oct 2006 Location: Reno, NV Posts: 4,446 Car: 2004WRX Class: Baby-Hauler/GroceryGetter	yeah that euro wing is the hawtness __________________ "A power nap is when you sleep on someone who is weaker than you." - Dimitri Martin

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High altitude PAX	sperry	Technical Chat	56	2006-11-10 08:53 AM
SVX suspension, Attn: sybir!	sperry	Technical Chat	30	2005-10-17 04:21 PM
Local WRX Part out...	MattR	User Classifieds	0	2005-02-27 04:46 PM
Subaru Only Track Day at Thunderhill - Who Wants Some?	Egan	Motorsports Chat	53	2004-09-29 08:28 AM
PR - Subaru WRX Wins USTCC Seasone Finale	GarySheehan	Motorsports Chat	13	2003-12-04 10:05 PM