WTB: Aftermarket Turbo Inlet Hose - Subaru Enthusiasts Car Club of the Sierras

100_Percent_Juice · 2007-03-03, 01:17 PM

what the title says^

sperry · 2007-03-03, 01:41 PM

Wasn't there already a thread about this?

I think I've got a samco inlet hose in a box in my garage somewhere... I'm not sure about the condition. Let me find it and you can make me an offer?

100_Percent_Juice · 2007-03-03, 03:28 PM

no there wasnt, I mentioned it in a thread. I figured that I would follow forum protocol and post my WTB here. Please find your hose and then we can talk.

sperry · 2007-03-03, 04:56 PM

Quote:

Originally Posted by 100_Percent_Juice

no there wasnt, I mentioned it in a thread. I figured that I would follow forum protocol and post my WTB here. Please find your hose and then we can talk.

"please find your hose"...

sperry · 2007-03-03, 05:22 PM

Okay, it took looking in 5 boxes, but I found it.

Pictures are attached. It's a blue samco inlet hose. One of the ports it blocked off because I was using a catch can that T'd into a single inlet, and since it's siliconed and hose clamped in there, I didn't pull the plug out out. If you want to run it with all the OEM hoses attached, I think it's just a matter of pulling out the plug.

Also the turbo side of things is a bit chewed up as the person that installed it on my GT30-10 had to stretch it to get it to fit and over-tightened the hose clamp.

But that shouldn't keep it from working just fine.

I paid like $300 for it, I'll sell it for how about $75?

100_Percent_Juice · 2007-03-03, 10:51 PM

Looks good to me. Loren should be PMing you tomorrow. How hard would you say it is to install? time wise?

sperry · 2007-03-03, 11:20 PM

Quote:

Originally Posted by 100_Percent_Juice

Looks good to me. Loren should be PMing you tomorrow. How hard would you say it is to install? time wise?

Taking out the old one and putting in the new one w/o removing the intake manifold is a PITA... I think it took MattR and I like 90 minutes at least when we did it down at ESX a while back.

imprezif · 2007-03-04, 12:32 PM

i just pm'd you about when would be a good time to get that thanks for taking the time to find it

2007-03-03, 01:17 PM	#1
100_Percent_Juice (40 percent vodka) Real Name: Joel Join Date: Oct 2006 Location: Reno, NV Posts: 4,446 Car: 2004WRX Class: Baby-Hauler/GroceryGetter	WTB: Aftermarket Turbo Inlet Hose what the title says^ __________________ "A power nap is when you sleep on someone who is weaker than you." - Dimitri Martin

2007-03-03, 01:41 PM	#2
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	Wasn't there already a thread about this? I think I've got a samco inlet hose in a box in my garage somewhere... I'm not sure about the condition. Let me find it and you can make me an offer? __________________ Is you is, or is you ain't, my con-stit-u-ints?

2007-03-03, 03:28 PM	#3
100_Percent_Juice (40 percent vodka) Real Name: Joel Join Date: Oct 2006 Location: Reno, NV Posts: 4,446 Car: 2004WRX Class: Baby-Hauler/GroceryGetter	no there wasnt, I mentioned it in a thread. I figured that I would follow forum protocol and post my WTB here. Please find your hose and then we can talk. __________________ "A power nap is when you sleep on someone who is weaker than you." - Dimitri Martin

2007-03-03, 05:22 PM	#5
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	Okay, it took looking in 5 boxes, but I found it. Pictures are attached. It's a blue samco inlet hose. One of the ports it blocked off because I was using a catch can that T'd into a single inlet, and since it's siliconed and hose clamped in there, I didn't pull the plug out out. If you want to run it with all the OEM hoses attached, I think it's just a matter of pulling out the plug. Also the turbo side of things is a bit chewed up as the person that installed it on my GT30-10 had to stretch it to get it to fit and over-tightened the hose clamp. But that shouldn't keep it from working just fine. I paid like $300 for it, I'll sell it for how about $75? Attached Thumbnails __________________ Is you is, or is you ain't, my con-stit-u-ints?

2007-03-03, 10:51 PM	#6
100_Percent_Juice (40 percent vodka) Real Name: Joel Join Date: Oct 2006 Location: Reno, NV Posts: 4,446 Car: 2004WRX Class: Baby-Hauler/GroceryGetter	Looks good to me. Loren should be PMing you tomorrow. How hard would you say it is to install? time wise? __________________ "A power nap is when you sleep on someone who is weaker than you." - Dimitri Martin

2007-03-04, 12:32 PM	#8
imprezif n00b Join Date: Jan 2007 Location: reno Posts: 17 Car: 02 wrx Class: compete? Tired of not being a millionaire	i just pm'd you about when would be a good time to get that thanks for taking the time to find it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Perrin Turbo inlet hose and chargepipe	dayofpain	User Classifieds	7	2006-02-23 10:26 PM
SCCA Club Trials car classification - take 2!	sperry	Motorsports Chat	17	2005-12-02 09:21 AM
FS: Turbo kit (For N/A EJ18/EJ22/EJ25)	Kostamojen	User Classifieds	11	2004-07-13 03:23 PM
GT4 Car List	ArthurS	Off Topic Chat	4	2004-01-03 07:47 PM