Tool Definitions - Subaru Enthusiasts Car Club of the Sierras

AtomicLabMonkey · 2004-02-18, 07:23 AM

Reposted from Corner Carvers, since I've never seen them here...

HAMMER: Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate expensive parts not far from the object we are trying to hit.

MECHANIC'S KNIFE: Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on boxes containing seats and motorcycle jackets.

ELECTRIC HAND DRILL: Normally used for spinning steel Pop rivets in their holes until you die of old age, but it also works great for drilling mounting holes in fenders just above the brake line that goes to the rear wheel.

PLIERS: Used to round off bolt heads.

HACKSAW: One of a family of cutting tools built on the Ouija board
principle. It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes.

VISE-GRIPS: Used to round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.

OXYACETELENE TORCH: Used almost entirely for lighting various flammable objects in your garage on fire. Also handy for igniting the grease inside a hub you're trying to get the bearing race out of.

WHITWORTH SOCKETS: Once used for working on older British cars and motorcycles, they are now used mainly for impersonating that 9/16 or 1/2 socket you've been searching for the last 15 minutes.

DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, splattering it against that freshly painted part you were drying.

WIRE WHEEL: Cleans rust off old bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprint whorls and hard-earned guitar calluses in about the time it takes you to say, "Ouc...."

HYDRAULIC FLOOR JACK: Used for lowering your car to the ground after you have installed your new front disk brake setup, trapping the jack handle firmly under the front fender.

EIGHT-FOOT LONG DOUGLAS FIR 2X4: Used for levering the fender upward off a hydraulic jack.

TWEEZERS: A tool for removing wood splinters.

PHONE: Tool for calling your neighbor to see if he has another hydraulic floor jack.

SNAP-ON GASKET SCRAPER: Theoretically useful as a sandwich tool for spreading mayonnaise; used mainly for getting dog-shit off your boot.

E-Z OUT BOLT AND STUD EXTRACTOR: A tool that snaps off in bolt holes and is ten times harder than any known drill bit.

TIMING LIGHT: A stroboscopic instrument for illuminating grease buildup.

TWO-TON HYDRAULIC ENGINE HOIST: A handy tool for testing the tensile strength of ground straps and fuel lines you may have forgotten to disconnect.

CRAFTSMAN 1/2 x 16-INCH SCREWDRIVER: A large motor mount prying tool that has an accurately machined screwdriver tip on the end without the handle.

BATTERY ELECTROLYTE TESTER: A handy tool for transferring sulfuric acid from a car battery to the inside of your toolbox after determining that your battery is dead as a doornail, just as you thought.

AVIATION METAL SNIPS: See hacksaw.

TROUBLE LIGHT: The mechanic's own tanning booth. Sometimes called a drop light, it is a good source of vitamin D, "the sunshine vitamin," which is not otherwise found under race cars at night. Health benefits aside, it's main purpose is to consume 40-watt light bulbs at about the same rate as a 25mm chain gun.
More often dark than light, its name is somewhat misleading.

PHILLIPS SCREWDRIVER: Normally used to stab the lids of old-style paper-and-tin oil cans and splash oil on your shirt; can also be used, as the name implies, to round off Phillips screw heads.

AIR COMPRESSOR: A machine that takes energy produced in a coal-burning power plant 200 miles away and transforms it into compressed air that travels by hose to a Chicago Pneumatic impact wrench that grips rusty bolts last tightened 40 years ago by someone in Detriot and rounds them off.

PRY BAR: A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 cent part.

HOSE CUTTER: A tool used to cut hoses 1/2 inch too short.

SOCKET WITH A UNIVERSAL EXTENSION: a tool that "breaks" when maximum torque is being applied causing one to smash their entire arm/hand/fingers into a solid object like a frame rail or engine block while disengaging said socket and having it fall into open hole in said frame rail or engine block....

DENTAL PICK: In the hands of a skilled hygienist, it is particularly effective at removing placque and tartar buildup. In the hands of a hack auto mechanic, it is quite useful for removing circlips.

HARBOR FREIGHT TOOLS: Any specialty tool that will be used exactly one time.

JESUS CLIPS: The "C" shaped retainer clips used on locking header bolts. So named because only Christ himself can get them on without a struggle, hence the frequent invocation of his name during installation.

CHAVEZ FASTENER: Rope.

METRINCH: The mongoloid offspring that result when metric and english sockets are allowed to mix in the wild plains of unorganized shop drawers. No one actually buys Metrinch, but everyone has at least one in their toolbox lying in wait to break their knuckles. Once the toolbox ecosystem has been contaminated, Metrinch is difficult to eliminate. No matter how many you've thrown you away you always seem to find another one.

MikeSTI · 2004-02-18, 08:34 AM

Dean · 2004-02-18, 10:33 AM

Oh man, that is funny....

dknv · 2004-02-18, 11:04 AM

Hilarious!
And I love that so many tools can be used to round off bolt heads!

Dean · 2004-02-18, 12:26 PM

Quote:

Originally Posted by dknv

And I love that so many tools can be used to round off bolt heads!

Don't forget Brake Line nuts as well. Right Scott?

sperry · 2004-02-18, 12:53 PM

Quote:

Originally Posted by Dean

Quote:

Originally Posted by dknv

And I love that so many tools can be used to round off bolt heads!

Don't forget Brake Line nuts as well. Right Scott?

No way, I "streamlined the bolt for less drag".

dknv · 2004-02-18, 01:10 PM

Did they have a definition for Krazy Glue,

!

STIwish · 2004-02-18, 01:31 PM

Dean · 2004-02-18, 01:47 PM

Quote:

Originally Posted by dknv

Did they have a definition for Krazy Glue,

!

Sorry, that would not be considered a tool, but an adhesive.

I'm sure we cold come up with a full list for adhesives if we wanted to from Paste to Super Glue.

ArthurS · 2004-02-18, 02:34 PM

Thats funny stuff.

tysonK · 2004-02-18, 06:18 PM

dude I love the air compressor one!

MattR · 2004-02-18, 07:23 PM

HARBOR FREIGHT TOOLS: Any specialty tool that will be used exactly one time.

That's the best. Hahaha, So true

Nick Koan · 2004-02-18, 08:14 PM

Quote:

Originally Posted by dknv

Did they have a definition for Krazy Glue,

!

Useful substance for permenantly sticking your fingers together.

dknv · 2004-02-18, 08:46 PM

Ok, what is the definition of 'monkey wrench'?

2004-02-18, 07:23 AM	#1
AtomicLabMonkey Nightwalker Real Name: Austin Join Date: Dec 2002 Location: Oshkosh, WI Posts: 4,063 Car: '13 WRX YGBSM	Tool Definitions Reposted from Corner Carvers, since I've never seen them here... HAMMER: Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate expensive parts not far from the object we are trying to hit. MECHANIC'S KNIFE: Used to open and slice through the contents of cardboard cartons delivered to your front door; works particularly well on boxes containing seats and motorcycle jackets. ELECTRIC HAND DRILL: Normally used for spinning steel Pop rivets in their holes until you die of old age, but it also works great for drilling mounting holes in fenders just above the brake line that goes to the rear wheel. PLIERS: Used to round off bolt heads. HACKSAW: One of a family of cutting tools built on the Ouija board principle. It transforms human energy into a crooked, unpredictable motion, and the more you attempt to influence its course, the more dismal your future becomes. VISE-GRIPS: Used to round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand. OXYACETELENE TORCH: Used almost entirely for lighting various flammable objects in your garage on fire. Also handy for igniting the grease inside a hub you're trying to get the bearing race out of. WHITWORTH SOCKETS: Once used for working on older British cars and motorcycles, they are now used mainly for impersonating that 9/16 or 1/2 socket you've been searching for the last 15 minutes. DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, splattering it against that freshly painted part you were drying. WIRE WHEEL: Cleans rust off old bolts and then throws them somewhere under the workbench with the speed of light. Also removes fingerprint whorls and hard-earned guitar calluses in about the time it takes you to say, "Ouc...." HYDRAULIC FLOOR JACK: Used for lowering your car to the ground after you have installed your new front disk brake setup, trapping the jack handle firmly under the front fender. EIGHT-FOOT LONG DOUGLAS FIR 2X4: Used for levering the fender upward off a hydraulic jack. TWEEZERS: A tool for removing wood splinters. PHONE: Tool for calling your neighbor to see if he has another hydraulic floor jack. SNAP-ON GASKET SCRAPER: Theoretically useful as a sandwich tool for spreading mayonnaise; used mainly for getting dog-shit off your boot. E-Z OUT BOLT AND STUD EXTRACTOR: A tool that snaps off in bolt holes and is ten times harder than any known drill bit. TIMING LIGHT: A stroboscopic instrument for illuminating grease buildup. TWO-TON HYDRAULIC ENGINE HOIST: A handy tool for testing the tensile strength of ground straps and fuel lines you may have forgotten to disconnect. CRAFTSMAN 1/2 x 16-INCH SCREWDRIVER: A large motor mount prying tool that has an accurately machined screwdriver tip on the end without the handle. BATTERY ELECTROLYTE TESTER: A handy tool for transferring sulfuric acid from a car battery to the inside of your toolbox after determining that your battery is dead as a doornail, just as you thought. AVIATION METAL SNIPS: See hacksaw. TROUBLE LIGHT: The mechanic's own tanning booth. Sometimes called a drop light, it is a good source of vitamin D, "the sunshine vitamin," which is not otherwise found under race cars at night. Health benefits aside, it's main purpose is to consume 40-watt light bulbs at about the same rate as a 25mm chain gun. More often dark than light, its name is somewhat misleading. PHILLIPS SCREWDRIVER: Normally used to stab the lids of old-style paper-and-tin oil cans and splash oil on your shirt; can also be used, as the name implies, to round off Phillips screw heads. AIR COMPRESSOR: A machine that takes energy produced in a coal-burning power plant 200 miles away and transforms it into compressed air that travels by hose to a Chicago Pneumatic impact wrench that grips rusty bolts last tightened 40 years ago by someone in Detriot and rounds them off. PRY BAR: A tool used to crumple the metal surrounding that clip or bracket you needed to remove in order to replace a 50 cent part. HOSE CUTTER: A tool used to cut hoses 1/2 inch too short. SOCKET WITH A UNIVERSAL EXTENSION: a tool that "breaks" when maximum torque is being applied causing one to smash their entire arm/hand/fingers into a solid object like a frame rail or engine block while disengaging said socket and having it fall into open hole in said frame rail or engine block.... DENTAL PICK: In the hands of a skilled hygienist, it is particularly effective at removing placque and tartar buildup. In the hands of a hack auto mechanic, it is quite useful for removing circlips. HARBOR FREIGHT TOOLS: Any specialty tool that will be used exactly one time. JESUS CLIPS: The "C" shaped retainer clips used on locking header bolts. So named because only Christ himself can get them on without a struggle, hence the frequent invocation of his name during installation. CHAVEZ FASTENER: Rope. METRINCH: The mongoloid offspring that result when metric and english sockets are allowed to mix in the wild plains of unorganized shop drawers. No one actually buys Metrinch, but everyone has at least one in their toolbox lying in wait to break their knuckles. Once the toolbox ecosystem has been contaminated, Metrinch is difficult to eliminate. No matter how many you've thrown you away you always seem to find another one. __________________ "None of you seem to understand. I'm not locked in here with you.. you're locked in here with me."

2004-02-18, 08:34 AM	#2
MikeSTI EJ205 Join Date: Aug 2003 Location: Reno, NV Posts: 2,354 Car: 2004 STi Class: TSM I can't complain	__________________ Cobb Stage 2

2004-02-18, 10:33 AM	#3
Dean Señor Cheap Bastarde Real Name: Dean Join Date: May 2003 Location: $99 Tire Store Posts: 9,294 Car: $.04 STI Class: Fast,Cheap & Reliable=STI Deal, did somebody say Deal? Oh, Dean, yeah that's me.	Oh man, that is funny.... __________________ I am a Commodore PET --- Now get off my lawn you kids...

2004-02-18, 01:31 PM	#8
STIwish EJ251 Join Date: May 2003 Location: Ocala, FL Posts: 894	__________________ STIwish

2004-02-18, 02:34 PM	#10
ArthurS EJ207 Join Date: Dec 2002 Location: Reno, NV Posts: 3,707 Car: 2011 Chevy Battle Wagon	Thats funny stuff. __________________ Captain Murphy: I dub thee Sir Phobos, Knight of Mars, beater of ass. Be a hitter, babe.

2004-02-18, 11:04 AM	#4
dknv EJ207 Join Date: Dec 2002 Location: 39n53, 119w90 Posts: 2,698 Car: RX-8 Class: CS maybe	Hilarious! And I love that so many tools can be used to round off bolt heads!

2004-02-18, 01:10 PM	#7
dknv EJ207 Join Date: Dec 2002 Location: 39n53, 119w90 Posts: 2,698 Car: RX-8 Class: CS maybe	Did they have a definition for Krazy Glue, !

2004-02-18, 06:18 PM	#11
tysonK warehouse SECCS Join Date: Mar 2003 Location: SoCal... Posts: 6,253 Car: 04 Evo 99 Cadillac Class: street de le mod	dude I love the air compressor one! __________________ Anjali? Anjali?

2004-02-18, 07:23 PM	#12
MattR El Matador Real Name: Matt Join Date: Dec 2002 Location: Reno, NV Posts: 10,660 Car: 2012 Toyota Tacoma Class: ?	HARBOR FREIGHT TOOLS: Any specialty tool that will be used exactly one time. That's the best. Hahaha, So true __________________ "Dallas..We have a problem.”

2004-02-18, 08:46 PM	#14
dknv EJ207 Join Date: Dec 2002 Location: 39n53, 119w90 Posts: 2,698 Car: RX-8 Class: CS maybe	Ok, what is the definition of 'monkey wrench'?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tool for removal of crank pulley?	SlickNick112	Technical Chat	15	2005-06-09 10:12 PM
Tool > NiN	MattR	Off Topic Chat	4	2005-03-21 04:51 PM